Z15 Rev 2 Module Model
!
! Rick Spielman 2015-10-11
!
Time-step 0.1e-9
Resolution-time 1e-9
End-time 1.5e-6
Number-prints 5
Execute-cycles all
Grids no
Echo-setup no
Max-points 4001
!
!Start circuit definition
!
! We start with a capacitor and switch with the parameters based on the
!  80 nF version of the GA 35426M Capacitor. C = 40 nF, L = 15 nH , ESR = 0.13 
! We will use a total inductance (demonstrated) of 160 nH for the brick.
! that includes the inductance of the feeds leading to the load and the
! inductance of the load.
!
! The charge voltage will be 85 kV. This is the projected normal operating
! point for Z15.
!
! The cavity will have 22 brick and all of the parameters of the brick model are
! scaled by 22X.
!
! Module will have 16 cavities and C/16, L & R * 16
! V = 170 kV * 16 = 2.72 MV
!
!
BRANCH
!
! Capacitor capacitance and charge voltage
!
RCGround 1e+12 55.0e-9
Initial  VC1   2.720e6
UFO VC1
$V_m_cap
!
! Cap inductance, case & parasitic inductance, and ESR
!
RLSeries 0.1536 36.3635e-9
!
! Switch resistance and switch inductance - estimated
!
RLSeries 0.02364 43.636e-9
!
! Output TL header inducatance
!
RLSeries 0.00   36.3635e-9
!
! Parallel core loss of 115.6  * 16 (est)
!
RCG    1849.6     1.0E-12
!
! Load resistance = Rmatched = (2.00-.3)*16/22 
!
RCGround 1.24 0.0
UFO IR1
$I_module
UFO VR1
$V_out
UFO PR1
$P_module
UFO ER1
$E_module
!
! End circuit
!