HADES Rev 1 Module Model
!
! Rick Spielman 2016-12-13
!
Time-step 0.1e-9
Resolution-time 1e-9
End-time 1.5e-6
Number-prints 5
Execute-cycles all
Grids no
Echo-setup no
Max-points 4001
!
!Start circuit definition
!
! We start with a capacitor and switch with the parameters based on the
!  80 nF version of the GA 35426M Capacitor. C = 80 nF, L = 15 nH , ESR = 0.13 
! We will use a total inductance (demonstrated) of 160 nH for the brick.
!  that includes the inductance of the feeds leading to the load and the
!  inductance of the load.
!
! The charge voltage will be 85 kV. This is the projected normal operating
!  point for HADES.
!
! The cavity will have 22 bricks and all of the parameters of the brick model are
!  scaled by 22X. C=40nF*22= 0.88 F, ESR=.26/22=0.01182,Rsw=0.04/22=0.00182
!  L1=50nH/22=2.2727e-9, L2=60nH/22=2.7273e-9, L3=L1
!
! Each module will have 3 cavities and C/3, L & R * 3
!  V = 170 kV * 3 = 510 kV, C=293.3 nF, ESR=35.46 m, Rsw=5.46 m, L1=6.8181nH,
!  L2=8.1819nH, L3=L1
!
! There will be one branch with 2 modules in parallel.
!  I will scale C by 2X and divide R and L by 2X
!  C=586.6 nF, ESR=17.73 m , Rsw=2.73 m, L1=3.41, L2=4.091 m, L3=L1
!
!
! First (Main) Branch
!
BRANCH
!
! Capacitor capacitance and charge voltage
!
RCGround 1e+12 586.6e-9
Initial  VC1   0.510e6
UFO VC1
$V_cap
!
! Cap inductance, case & parasitic inductance (50nH), and ESR
!
RLSeries 17.73e-3 3.41e-9
!
! Switch resistance and switch inductance (60nH) - estimated
!
RLSeries 2.73e-3 4.091e-9
!
! Output TL header inducatance (50nH)
!
RLSeries 0.00   3.41e-9
!
! Parallel core loss of 115.6  / 6 (est)
!
RCG    19.27     1.0E-12
!
! Disk Feed (single feed L=40 nH divided by 2)
!
RLSeries 0.00   20.0e-9
!
! PHC
!
!
! Inner feed
!
!
!
! Load inductance
!
RLSeries 0.0 20.0e-09
!
! Load resistance
!
RCGround 0.1 0.0

UFO IR1
$I_load
UFO VR1
$V_load
UFO PR1
$P_mload
UFO ER1
$E_module

!
! End circuit
!